The MC-59 from Ben Pearson is truly the ultimate
in pipe bender technology. Incorporating state-of-the-art technology,
the MC-59 pipe bender leads the industry in operator convenience
features --- 180 degree bend on 5" radius, 3" bending capability
and a rugged electrical and hydraulic system that will perform
over the long haul. Plus, the MC-59 Pipe Bender offers two end-of-pipe
systems for quick and easy operation.
The MC-59 from Ben Pearson is truly the "TOP GUN" in the exhaust service repair industry.
- Lifetime Limited Warranty
- Bend depth to 180° on a 5" radius
- Quick-change dies
- Color-coded dies
- Spring-loaded die carriage
- Automatic depth-of-bend
- Automatic motor cut-off
- 220 volt single phase, 60 cycle
|
- Bending capability through 3"
- Unique die design eliminates possibility of radius die
locking behind back shoes
- Knee control of ram die
- Energy efficient dual stage hydraulic pump
- Heavy-duty 4 HP motor
|
180° Bend On A 5" Radius
Try this with another pipe bender and the results may be less
than spectacular. With the Ben Pearson pipe bender you'll
get a perfect 180° bend on a 5" radius die. What
you won`t get is a pipe that is crimped or collapsed. The
reason for this is very simple-Ben Pearson's unique die construction
eliminates the problem of the pipe locking on the die. This
extra feature saves you, the operator, time and money.
|
Longer Stroke Main Cylinder
We've added an extra 3" stroke to the main cylinder. The benefits are obvious-you get an extra 6" of space between the edge of the ram
die and the edges of the back shoes. You have more room to feed pipe through the machine, thus eliminating the need for cumbersome
and time consuming pusher blocks. Ben Pearson developed the longer stroke main cylinder for operator convenience.
|
The MC-59 Offers Two End-of-Pipe Systems
 To
make your job easier, faster and more efficient, the MC-59
offers two end-of-pipe systems as standard equipment. The
segment expander offers some unique features that make it
easier to operate than competitive models. Like the ability
to expand, flare or ball joint close to the end of the pipe.
Plus, the unique bull's eye gauge, with an accurate and complete
O.D. and I.D. setting chart, ensures accurate connections
and slip fits. The clamp-down swager system on the MC-59 gives
you the flexibility to swage, flare, ball joint, reduce and
flange. Plus, for more power and increased operator safety,
the clamp-down swager system operates on a separate cylinder. |
|
